Elo TouchSystems 19R SERIES Uživatelská příručka stáhnout pdf (Strana 20)

VESA Mount on Your Touchmonitor

Figure 2.4 Stand and Display Separation

NOTE: The above drawing displays the VESA mounting interface after the removal of the

mounting cover and base.

NOTE: You will need a 3mm Hex Wrench for the following steps.

• Remove the four screws in order to separate the stand from the monitor

(see Figure 2.4).

• Rotate the monitor 180° (ensuring the monitor will not be upside down

when mounted in the position shown).

• Reinstall the four screws.

• Route the cables through the cutout (if applicable) and mount the

monitor to the wall using the template in Figure 2.

Elo Entuitive Touchmonitor User Guide

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 49 50

Žádné komentáře

Elo TouchSystems 19R SERIES Uživatelská příručka Strana 20